100W ROCKMOD Head
Price
- (click to register)
Click to Enlarge
The ROCKMOD 100W head is a powerhouse of tone,
gain, and versatility. The all-tube design has four EL-34s or 6550s
and seven 12AX7s. Its features include highly sensitive EQ sections
for each of the three channels, master presence control, selectable series
or parallel tube-buffered effects loop, foot-switchable boost for Burn and
Crunch channels, and a pull-bright feature on the Clean. Channel
switching is achieved via front panel rotary knob, foot switch, or rear
panel jacks for connection to a switching system. The RM-100H is
proudly handcrafted in Southern California, USA.
Note: The following channel descriptions are common to all ROCKMOD heads,
combos and pre-amps.
The BURN channel produces a huge amount of articulate and musical
gain with an ability to retain its openness and dynamics. Every note played
is easily tracked with excellent clarity and rich harmonics explode across
the entire fret board. With the Post-Gain knob, all amounts of saturation
can be controlled, from light to heavy.
The CRUNCH channel has that unmistakably British-flavored bark and
growl that is tight, grinding, and totally classic rock. Vintage and
"modified" amp sounds are available for full-bodied chunky rhythms and
stringy, bluesy solos. From low to high-gain tones, they are all here in
this very versatile channel.
The CLEAN
channel is rich and full-bodied with a beautiful, crystal clear tone with
notes that jump out and snap with a detailed and articulate voice. A variety
of tones are possible, from “super clean with high headroom,” to “edgy and
pushed, dirty-clean” sounds. The pull-bright feature provides added
dimension and brilliance.
Features:
-
All-tube design,
4-EL34s, 7-12AX7s, 100 watts
-
Burn, Crunch and Clean
channels
-
Independent EQ for each
channel
-
Series/Parallel
tube-buffered effects loop
-
Boost function for Burn
and Crunch channels
-
Pull-Bright feature on
Clean channel
-
Channel switching via
front panel, foot switch and remote switching system
-
International voltage
selector
-
Front and back
ventilation for cool operation
-
Dimensions - 29"W x 8
3/4"D x 11 1/2" H
-
Weight - 45 lbs (20.4
Kg)
-
Colors -
50W ROCKMOD Head
Price
- (click to register)
The ROCKMOD 50W head is one of the
most versatile amplifiers on the market that is compact and easy to carry.
Perfect for studio or
live
performances where a demand for multiple, high-quality tones are required.
Features include highly sensitive EQ sections for each of the three channels,
master presence control, selectable series or parallel tube-buffered effects
loop, foot-switchable boost for Burn and Crunch channels and mute. Channel
switching is achieved via front panel rotary knob, foot switch, or rear panel
jacks for connection to a switching system. The RM-50HD is proudly handcrafted
in Southern California, USA.
Note: The following channel descriptions are common to all ROCKMOD heads,
combos and pre-amps.
The BURN channel produces a huge amount of articulate and musical
gain with an ability to retain its openness and dynamics. Every note played
is easily tracked with excellent clarity and rich harmonics explode across
the entire fret board. With the Post-Gain knob, all amounts of saturation
can be controlled, from light to heavy.
The CRUNCH channel has that unmistakably British-flavored bark and
growl that is tight, grinding, and totally classic rock. Vintage and
"modified" amp sounds are available for full-bodied chunky rhythms and
stringy, bluesy solos. From low to high-gain tones, they are all here in
this very versatile channel.
The CLEAN
channel is rich and full-bodied with a beautiful, crystal clear tone with
notes that jump out and snap with a detailed and articulate voice. A variety
of tones are possible, from “super clean with high headroom,” to “edgy and
pushed, dirty-clean” sounds. The pull-bright feature provides added
dimension and brilliance.
Features:
-
Preamp
with 7-12AX7s
-
Output
tube stages comes with either 2-EL34s, 2-6L6, , 2-6550, ~ 50W
-
Burn, Crunch and Clean
channels
-
Independent EQ for each
channel
-
Series/Parallel
tube-buffered effects loop
-
Boost function for Burn
and Crunch channels
-
Pull-Bright feature on
Clean channel
-
Channel switching via
front panel, foot switch and remote switching system
-
International voltage
selector
-
Front and back
ventilation for cool operation
-
Dimensions - 21 1/4"W x
8 3/4"D x 10 1/4" H
-
Weight - 40 lbs (18.1
Kg)
-
Colors -
ROCKMOD III - 3 Channel Pre-Amp
Price
- (click to register)
The ROCKMOD Preamp is a hand wired
all-tube preamp housed in a compact, lightweight, and durable aluminum chassis
that features three channels with individual EQ sections. The flexible
tube-buffered effects loop is switchable between series or parallel operation. A
foot switchable boost is available on the Burn and Crunch channels, while the
Clean channel sparkles providing crisp vintage tone. The ROCKMOD is a totally
professional piece of equipment; hand crafted in the USA using high-quality
components. It's unique, versatile, and cleverly designed circuit makes it an
indispensable tool on the stage and in the studio. Discerning guitarists that
know great tone when they hear it will instantly recognize the ROCKMOD as a
truly world-class preamp.
Note: The following channel descriptions are common to all ROCKMOD heads,
combos and pre-amps.
The BURN channel produces a huge amount of articulate and musical
gain with an ability to retain its openness and dynamics. Every note played
is easily tracked with excellent clarity and rich harmonics explode across
the entire fret board. With the Post-Gain knob, all amounts of saturation
can be controlled, from light to heavy.
The CRUNCH channel has that unmistakably British-flavored bark and
growl that is tight, grinding, and totally classic rock. Vintage and
"modified" amp sounds are available for full-bodied chunky rhythms and
stringy, bluesy solos. From low to high-gain tones, they are all here in
this very versatile channel.
The CLEAN
channel is rich and full-bodied with a beautiful, crystal clear tone with
notes that jump out and snap with a detailed and articulate voice. A variety
of tones are possible, from “super clean with high headroom,” to “edgy and
pushed, dirty-clean” sounds.
Features:
-
All tube design with
7-12AX7s
-
Burn, Crunch and Clean
channels
-
Independent EQ for each
channel
-
Series/Parallel
tube-buffered effects loop
-
Boost function for all
channels
-
Channel switching via
front panel, foot switch and Remote switching system (MIDI optional)
-
International voltage
available
-
Top
ventilation for cool operation
-
2 button foot switch included
-
Dimensions - 17"W x 9
1/2"D x 3" H
-
Weight - 8 1/2 lbs
-
Colors - Black
ROCKMOD Brick Two Channel Amplifier
Price
- (click to register)
Click to Enlarge
The ROCKMOD Brick preamp and
poweramp combo is the perfect amp for home studios, clubs and churches producing
the right about of volume for a perfect mix. The Brick will produce a
power house of tone, gain and sustain. The ROCKMOD Brick was modeled after
the classic ROCKMOD I preamp that has been the hidden secret of tone for more
than 20 years with producers and pro guitar players worldwide. The RB-01 has (2)
channels with (4) 12AX7 drivers. One lead channel with dual masters and
one clean channel that share the same EQ. The RB-01 runs (2) EL84
producing a rich full body tone with endless sustain. The RB-01 comes with
a tube active effects loop that can be used to power modeling or effect systems
and a line out for use as a a preamp. A two channel foot switch is included.
The
LEAD channel has that unmistakably British-flavored bark and growl
that is tight, grinding, and totally classic rock. Vintage and "modified"
amp sounds are available for full-bodied chunky rhythms and stringy, bluesy
solos. From low to high-gain tones, they are all here in this very versatile
channel.
The CLEAN
channel is rich and full-bodied with a beautiful, crystal clear tone with
notes that jump out and snap with a detailed and articulate voice. A variety
of tones are possible, from “super clean with high headroom,” to “edgy and
pushed, dirty-clean” sounds.
Features:
-
All tube design with
4-12AX7s
-
EL84 (2) class A
-
Lead and Clean channels
-
One EQ for both channel
-
Series tube-buffered
effects loop
-
Dual master volume
for Lead channels
-
Channel switching via
foot switch and remote switching system
-
Top
ventilation for cool operation
-
Aluminum housing
-
Side handle
-
Optional carrying case
-
Optional rack ears
-
Dimensions - 12.5"W x
5.25"D x 5" H
-
Weight - ~ 9 lbs
ROCKMOD Brick Combo
Price
- (click to register)
Click to Enlarge
The ROCKMOD Brick combo (RMBC-01) is
the perfect amp for professional recording or live performances. Features
include a removable ROCKMOD Brick, Robo-CAB (motorized speaker positioning
system) that allows a close back cabinet sound to a variable open back cabinet
controlled with a up/down switch in the back or optional foot controller for
hands free operation. The integrated ROCKMOD Brick was modeled after the
classic ROCKMOD I preamp that has been the hidden secret of tone for more than
20 years with producers and pro guitar players worldwide. The RMBC-01 has (2)
channels with (4) 12AX7 drivers. One lead channel with dual masters and
one clean channel that share the same EQ. The RMBC-01 runs (2) EL84
producing a rich full body tone with endless sustain. The RMBC-01 comes
with a tube active effects loop that can be used to power modeling or effect
systems and a line out for use as a a preamp. A two channel foot switch is
included.
The
LEAD channel has that unmistakably British-flavored bark and growl
that is tight, grinding, and totally classic rock. Vintage and "modified"
amp sounds are available for full-bodied chunky rhythms and stringy, bluesy
solos. From low to high-gain tones, they are all here in this very versatile
channel.
The CLEAN
channel is rich and full-bodied with a beautiful, crystal clear tone with
notes that jump out and snap with a detailed and articulate voice. A variety
of tones are possible, from “super clean with high headroom,” to “edgy and
pushed, dirty-clean” sounds.
Features:
-
Robo-CAB - close back to
open back in seconds
-
All tube design with
4-12AX7s
-
EL84 (2) class A
-
Lead and Clean channels
-
One EQ for both channel
-
Series tube-buffered
effects loop
-
Dual master volume
for Lead channels
-
Channel switching via
foot switch
-
Top
ventilation for cool operation
-
Aluminum housing
-
Side handle (ROCKMOD Brick only)
-
Removable Chassis
-
Leather handle
-
Vintage design
-
Dimensions - 21.5"W x
13"D x 22.5" H
-
Weight - ~ 53 lbs
RoBo-Combo 1x12
Price
- (click to register)
Click to Enlarge
The 1X12 Robo-Combo is the ultimate
choice for studio and club gigs that require many sounds, but in a compact and
easily portable package. It's all here! With three channels of hand-wired
50-watt ROCKMOD tone, series/parallel tube-buffered FX Loop, and 0-80 degrees of
RoBo-CAB technology available, the R112-C is an incredibly versatile tone
machine that easily covers any musical situation. All functions can be activated
and controlled in a number of ways... Manual operation on the front and rear
panels, Standard and Deluxe Kasha foot switches, and connection to custom/midi
control systems via the 1/4" jacks. Hand crafted in Southern California, USA.
Note: The following channel descriptions are common to all ROCKMOD heads,
combos and pre-amps.
The BURN channel produces a huge amount of articulate and musical
gain with an ability to retain its openness and dynamics. Every note played
is easily tracked with excellent clarity and rich harmonics explode across
the entire fret board. With the Post-Gain knob, all amounts of saturation
can be controlled, from light to heavy.
The CRUNCH channel has that unmistakably British-flavored bark and
growl that is tight, grinding, and totally classic rock. Vintage and
"modified" amp sounds are available for full-bodied chunky rhythms and
stringy, bluesy solos. From low to high-gain tones, they are all here in
this very versatile channel.
The CLEAN
channel is rich and full-bodied with a beautiful, crystal clear tone with
notes that jump out and snap with a detailed and articulate voice. A variety
of tones are possible, from “super clean with high headroom,” to “edgy and
pushed, dirty-clean” sounds. The pull-bright feature provides added
dimension and brilliance.
Features:
-
Preamp
with 7-12AX7s
-
Output
tube stages comes with either 2-EL34s, 2-6L6, , 2-6550
-
Burn, Crunch and Clean
channels
-
Independent EQ for each
channel
-
Series/Parallel
tube-buffered effects loop
-
Boost function for Burn
and Crunch channels
-
Pull-Bright feature on
Clean channel
-
Channel switching via
front panel, foot switch and remote switching system
-
International voltage
selector
-
Front ventilation for
cool operation
-
Celestion Speaker (G12T-75) 75W
or 80W
-
Hand crafted Baltic birch wood
cabinet construction
-
RoBo-CAB feature tilts speaker
0-80 degrees
-
Dual ported
-
Manual tilt control or
(optional) motorized tilt control with panel and remote switching up and
down
-
(Optional) detachable hand cart
-
Dimensions - 21 1/4"W x
11 1/4"D x 24" H
-
Weight - 60 lb (27.2 Kg)
-
Colors -
RoBo-CAB 1x12 Guitar Monitor
Price
- (click to register)
The RoBo-CAB 1x12 is the worlds
first tilt-able speaker system and has revolutionized the way amplified sound
can be produced. The sonic possibilities that were unattainable before, are now
a reality. From subtle to extreme, the RoBo-CAB produces many different
acoustical characteristics and frequencies without having to change the
microphone(s) position or use any EQ. The RoBo-CAB is indispensable in the
studio, where creating new and exciting sounds quickly is very important. There
are many benefits for stage use, too. By moving the speaker angle towards your
ears, you greatly improve the ability to monitor yourself more clearly, and at
the same time increase your "sound spread" to easily fill up and adapt to any
room or club. By changing the angle of the speaker, different combinations of
"closed" and "open" sounds are available from one cabinet. For up/down speaker
movement, a switch on the rear panel provides manual operation, and for the
ultimate in control and fun, an optional footswitch is available or remote,
"hands-free" operation.
Features:
-
RoBo-CAB feature tilts
speaker 0-80 degrees
-
8 ohm output,
Celestion Speaker (G12T-75)
-
Hand crafted sturdy
Baltic birch wood cabinet construction
-
Motorized tilt control
with panel and remote switching up and down via foot switch or switching
system
-
Automatic shut-off
switch up and down
-
Closed back
-
Dimensions - 21 3/4"W x
14 1/2"D x 17 1/2" H
-
Weight - 40 lb (18.1 Kg)
-
Colors -
RoBo-CAB 2x12 Concert Cabinet
Price
- (click to register)
The RoBo-CAB 2x12 is the worlds
first tilt-able speaker system and has revolutionized the way amplified sound
can be produced. The sonic possibilities that were unattainable before, are now
a reality. From subtle to extreme, the RoBo-CAB produces many different
acoustical characteristics and frequencies without having to change the
microphone(s) position or use any EQ. The RoBo-CAB is indispensable in the
studio, where creating new and exciting sounds quickly is very important. There
are many benefits for stage use, too. By moving the speaker angle towards your
ears, you greatly improve the ability to monitor yourself more clearly, and at
the same time increase your "sound spread" to easily fill up and adapt to any
room or club. By changing the angle of the speaker, different combinations of
"closed" and "open" sounds are available from one cabinet.
For up/down speaker movement, a
switch on the rear panel provides manual operation, and for the ultimate in
control and fun, an optional footswitch is available or remote, "hands-free"
operation.
Features:
-
RoBo-CAB feature tilts
speaker 0-80 degrees
-
8 ohm output, Celestion
Speaker (G12T-75)
-
Hand crafted sturdy
Baltic birch wood cabinet construction
-
Motorized tilt control
with panel and remote switching up and down via foot switch or switching
system
-
Automatic shut-off
switch up and down
-
Closed back
-
Dimensions - 30"W x 14"D
x 17 1/2"H
-
Weight - 55 lb (45.35
Kg)
-
Colors -
RoBo-CAB 4x12 Concert Cabinet
Price
- (click to register)
The RoBo-CAB 4x12 is the worlds
first tilt-able speaker system and has revolutionized the way amplified sound
can be produced. Constructed of strong and resonant Baltic birch, the R412 is
actually three cabinets in one! You can use the top 2x12 RoBo section or the
straight bottom 2x12 section by themselves, or for a huge sound, use both
sections together to create a wall of 4x12 power. The combinations of both
sections combined with the RoBo-CAB technology allow for almost limitless sound
creations and applications. The ability to have a "closed and punchy" sound
along with an "open and airy" sound out of just one cabinet is now a reality.
Along with the different
acoustical characteristics and frequencies that the top RoBo section is
capable of producing, it can also act as a personal monitor for you on stage
to hear yourself easier by directing the speakers upward, toward your ears.
The rear panel has individual jacks for each "section" and controls for the
RoBo-CAB function that can be operated manually or via footswitch. All
variations of classic, modern, straight, slanted, subtle and extreme sounds
are available with the 4x12 RoBo-CAB. Have fun, explore, and create your own
new RoBo sounds!
Features:
-
RoBo-CAB features the
top tilt speaker 0-80 degrees
-
Speaker switching panel:
-
Top - Dual 8 ohm
Celestion speakers (G12T-75)
-
Bottom Dual 8 ohm
Celestion speakers (G12T-75)
-
Top and bottom mixed
at 4 ohms
-
Hand crafted sturdy
Baltic birch wood cabinet construction
-
Motorized tilt control
with panel and remote switching up and down via foot switch or switching
system
-
Automatic shut-off
switch up and down
-
Closed back
-
Dimensions - 30"W x 14"D
x 32" H
-
Weight - 100 lb (45.3
Kg)
-
Colors -
1x12 studio cabinet with removable
front bezel
Price
- (click to register)
This compact cabinet packs a punch
and has beautiful acoustical present in the studio or live. The 12"
speaker is front loaded and has a sealed back to produce the maximum amount of
bass response with clarity.
Features:
-
Hand crafted sturdy
Birch wood cabinet construction
-
Finished tolex corners
-
Stock speaker Celestion
(G12T-75)
-
Sealed closed back
-
Removable front bezel
-
Dimensions - 21.5"W
x 12"D x 17" H
-
Weight - 28lb
-
Caster removable wheels
-
Colors - Black
(other colors and patterns available on request)
RoBo-CAB 4x12 Concert Cabinet
Price
- (click to register)
The Freedom cab is a symbol of
American freedom and abroad. Besides its great looks, it has been used on
many albums from top artist in the music industry due to how warm and open the
Freedom cab cuts through the mix. Made out of Birch and finished without
corner hardware, it will be a collectable for years to come.
Features:
-
Hand crafted sturdy
Birch wood cabinet construction
-
Finished tolex corners
-
Top - Dual 8 ohm Celestion
speakers (V30)
-
Bottom Dual 8 ohm Celestion
speakers (G12T-75)
-
Closed back
-
Dimensions - 29"W x
14"D x 32" H (with casters)
-
Weight - 85lb
-
Caster removable wheels
-
Colors - Black
QUIKMOD Classic
Price
- (click to register)
Click to Enlarge
In less than 5 minutes the Quikmod ® converts a one channel tube amp into a
two channel or a two channel into a three channel with a powerhouse of tone,
gain and sustain. It is safe and easy to install, just like replacing
a tube. Once installed, it can instantly switch between original and
Quikmod ® sounds via footswitch. Dust off those classic amps and
instantly create your next tone machine.
Features:
-
All tube design with
2-12AX7
-
Gain and Post Gain
controls
-
Jacks - Guitar input,
Amp input, Remote
-
Channel switching via
back panel and foot switch
-
Power and connection
through QUIKcable
-
Dimensions - 4.5"W x
4.25"D x 4" H
-
Weight - 2.5 lbs
4 Channel Overdrive Pedal with Turbo Boost
Price
- (click to register)
 |
 |
| Andy Z Demos wtih Valve Jr. |
Andy Z Demos with RM-50, Plexi |
Background
The pedal was designed after the
Rockmod sound that has been around since 1985 played by pros such as George
Lynch, Jake E. Lee, Davey Johnstone, Dann Huff, Tim Pierce, Phil X, Paul
Jackson Jr. and so on... With the advancement of analog micro technology,
Kasha Amplifiers was able to design an overdrive pedal with the
characteristics of a boutique amplifier.
The first thing to note is that it doesn't have a tone control. That is by
design. A big problem that most pedals have is the addition of a tone control or
passive filter. It is used to damp the unwanted high frequencies. In most pedals
that have them, they do nothing but destroy your amp tone. The Kasha Overdrive (KOD)
was designed like a fine 4 course gourmet meal. Each voicing has just the right
amount of gain, highs, mids and lows to accent your amp without unwanted
feedback. There are 4 voicing selections. Smooth, Classic, Hot and Melt in
addition to the Turbo switch. The theory behind this is simple. You are buying a
OD pedal because you have a tone problem or your amp lacks gain. You want
something to boost your solos, or drive your preamp or poweramp for more
clipping/distortion. You like the tone of your amp and would prefer keeping it.
This is exactly the solution for you.
Smooth (3dB up) You just turned your
gain knob of your amp to 10, but you still need more gain to get the tone and
gain you desire. If you set the KOD Gain knob a little pass half, this is unity
gain (the input and output voltage signal is at the same gain level). To test
this, click the foot switch with the KOD on and then off. There will be NO TONE
CHANGE. You then can continue to turn the KOD gain knob to the desire level.
This is great to get that small breakup with a blues riff or a little hair on
your clean channel. By switching on the Turbo, you will boost 10dB. This is
great for a cleaner power chord or smooth lead tone like you would hear on an
old Santana album. With all the voicings on the KOD, you will hear every note no
matter how fast you play. Go ahead and play that E7+9 chord. Every note will
punch, track, ring, sparkle, and thud just like you wished for.
Classic (11dB up) The voicing on this
channel adds a dash of bass and highs to your tone still keeping your overall
signal intact. You will need to adjust the KOD Gain depending if your amp has a
lot of gain or just a small amount. This channel can take a dull sound and
sparkle it up. In fact, take a Les Paul and run it with this voicing, it will
sound like you are playing a Strat with stacked pickups. You can turn down the
volume of your guitar and really get some nice clean tones. Use it for dynamics
in your songs from a clean crunch to balls to the wall. Turbo boost will gives
you a completely different spectrum of tone and gain highly desired for metal
with this voicing.
Hot (15dB up) This voicing is perfect
to turn your amp into a chain saw. I used this with an 5W inexpensive tube amp
and turned it into a screaming Marshall. The chunk you can get from this is
amazing. You need to hear it to believe it, but for now, trust me and let me
know if I was wrong. I think this is a good setting for a solo boost. Your leads
will sustain for days and every note will be heard. Turbo takes you to unlimited
sustain. With the turbo on, you can make your guitar into a violin without even
picking a note.
Melt (18dB up) You are almost there,
your dream tone is starting to take shape, but you need more bass. The Melt is
the channel for you. This voicing takes up the gain a few ticks and then adds a
tight bottom end that you would need a graphic EQ to get without the synthetic
edge. Your notes become thick without the flub and overtones. You now reached
the tone summit and life is good. Remember, if you still want more gain, you can
click in the Turbo. This will take you into another dimension of gain and
distortion. If you are thrill seeker, go ahead, go for it.
Features:
-
- 4 channels with separate voicing and gain structure
- Analog design
- 10 dB clear boost
- True bypass switching
- Very low power consumption (3mA and runs on a single 9V battery)
- No tone change, only enhances sound
- Compact standard aluminum chassis (4 3/8"x2 1/4" x 1 1/4")
- AC power jack (uses standard Boss DC power supplies)
- High gloss mirror black powder coat
- Hand made in the USA
- Low noise
- Crystal Blue LED (high intensity)
- Weight: 1.5lb
QUIKMOD Mini
Price
- (click to register)
In less than 5 minutes the Quikmod ® Line-in allows you to bypass the preamp
circuit in your existing tube amp and use only the power amp portion in
combination with the ROCKMOD preamp , Brick, guitar processors or effects.
There is no permanent alteration to your amplifier. Quikmod ® Line-in
simply plugs into a tube socket in the back of your amp and your ROCKMOD
plugs into the Line-in. It is safe and easy to install.
The
Line-In QUICKMOD mini replaces the preamp tube in the V3 position allowing
the musician to add modeling pedals, preamps and other devices that need to
be plugged directly to a power amp. The Line-in also comes in a switching
model that can switch between the original amp sounds and the external
device
Features:
-
1- 12AX7 (can be
substituted)
-
Jacks - Amp input
-
Ground cable
-
Power and connection through
tube socket
-
Dimensions - 3.75"W x
1.5"D x 1.25" H
-
Weight - 1 lbs
QMM-01M, QMM-01MU - The Master Volume
QUICKMOD® mini brings a whole new dimension to the guitar amplifier as
the player is now able to add a master volume or even a second master volume
to amps that would have needed to have a technician modify it and possibly
change the aesthetics. This solves many problems for guitarists who would
have to purchase a load box to the amp to bring the volume to a reasonable
playing level. The master volume feature delivers a cleaner signal to the
power amp without sounding muddy. The
QMM-01M and QMM-01MU minis are switching via standard shorting foot switch
(not included).
QMM-01M - Master for
Marshall® type amps only. Plugs into
Price
- (click to register)
QMM-01MU - Universal
Master plugs into V3 or phase inverter tube. Works in Fender®,
Gibson®, Vox®, etc.. Please call to make sure it will work for your
amp.
Price
- (click to register)
Accessories
Footswitch info
The two-button, standard
footswitch that controls channel-switching only, comes with all ROCKMOD
amps. The optional, five-function Deluxe Footswitch provides total control
of your ROCKMOD.
|
 |
RMF2 -
2 BUTTON
SWITCHING
-Two-button footswitch. First switch toggles between Distortion
channels and Clean. While on Burn, second switch toggles Burn and
Crunch. This is a great light weight and compact 3 channel
switch.
Price
- (click to register) |
|
|
RMF4 -
4 BUTTON
SWITCHING -First switch
toggles between Distortion channels and Clean. While on Distortion
channel, second switch toggles Burn and Crunch. The other
three switches are for boost and effects
Price
- (click to register)
After market - $150.00 |
|
 |
RBC2 -
RoBo-CAB CONTROL PEDAL -
The pedal controls the direction of the RoBo cab and can be plugged
into any model of Kasha Amplifiers RoBo-CAB systems via remote jack.
The pedal takes a standard stereo chord included and a stereo AUX
jack that can be plugged into a switching system.
Price
- (click to register)
|
Download data sheet
